Hello all. Hoping to get some help with a 1998 JLG lift that i acquired. It is a duel fuel propane / gas 45IC. All controls (drive, lift, boom up, boom out, swing ect) work from the ground controls. when i turn the key to the basket controls i can drive the machine but none of the other controls work. If i push the foot pedal i get a green light on the control and the rpm goes up. if i hold the foot pedal it times out after a few seconds and i can re push the pedal. I was poking around in the control box on the basket and noticed 2 cards labeled drive and flow. The drive board gets 12v when i push the foot pedal at the fuse on the board. the flow card does not. Anyone have any direction i can test to figure out how to get the controls to work on the basket? I noticed some of the wires that are on the flow control card go up to this flow control pot that doesnt seem to do anything. Thank you in advance!
No replies yet.