I NEED IDEAS....because I’m at my wits end working on this damned thing. I have tested the solenoids and had one not working. Got that replaced with A LOT of cursing. Now I am on to testing the switch. I discovered the switch has no power. I have a diagram from BOBCAT and it says my harness(delux wiring harness) is fed from a wire labeled 1180. I don’t know specifically what powers this wire. I can see it comes from the “beacon switch” but my diagram stops there. I need to know what relay powers the beacon switch so I can replace that or go further into it and locate an issue. Any ideas or help would be greatly appreciated.
No replies yet.