i need to replace the shear coupler on output shaft to diff shaft, got the PTO lever cover off and tried to pull the front shaft out , wont move enought sideways to clear the rear shaft, so i am stuck there !!!
Welcome to HEF, Marcel ! Could you post some photos of the shaft ?
already put everything back together, transmission output shaft & differencial pinion shaft are joined by a shear coupler, in order to replace the coupler you have to remove the trans output shaft, slide off the broken coupler, slide the new coupler & reinstall the shaft. was not able to remove that trans output shaft ....
Did you make sure to take the pin out for the 3pt. Hitch controls before you removed the top cover? If not the linkage may be bent. It can be accessed through the draft response control but may have to come back out if it's bent too much. Are you related to Carl who is national mX champion? I made a plaque for him when he was in Edmonton. An ** dealer should be able to help as the hyd. System hasn't changed much on smaller ** tractors.