05 314 clcr serial is jpca00997 Just bought the machine a few weeks back took to its first real job have noticed that when you are demanding full power on 2 or 3 functions the motor would bog down ran about 4 hours noticed the oil started getting warm was able to finish the job and start checking things Hooked up a gage to both test ports on the pump one at a time relief valve opens around 4300psi machine would stall if you held into what you were doing after about 4 seconds but the gage never climbed higher than 4400psi We are thing pump controller is not working correctly now I have been told these are a negative flow system so I dont really know much about it any ideas or knowledge would be great
No replies yet.