When I started my 315 the other day the control panel said the hydraulic oil was low. I checked the sight glass and it was a little low. So I topped it off and now its right where it should be on the sight glass. Trouble is the warning still comes up during start up. Is there some kind of reset?
Are you sure it's a LOW-OIL warning and not a Low Pressure warning light ?? ..... which may be a filter going bad .... just thought I'd ask .... let us know.... cheers
The sensor probably failed , try jumping the harness at the sensor, its a two wire sensor below the filters on the hydraulic tank , disconnect the plug and jump the harness wires .