320DL. Shut it off for lunch, cane back, starts up but wont track and no hydraulics. Acting as if safety lever is in safety position. Checked micro switch in safety lever and it is fine. Is it likely the hydraulic lock solenoid? If so, where is it located? Thanks.
The 320D comes in lots of different flavours. If you supply a Serial Number that will identify what you have because you will probably need an electrical schematic.
S/N is CAT0320DVSPN01135
Right. That gets you the electrical schematic. Check your message inbox. The good thing is that the implement pilot solenoid, swing brake solenoid, and travel speed solenoid are all the same part number so you if you establish that power is coming to the pilot solenoid you can always swap it around with one of the others for testing. See the attachment.