Hello everyone. There is an excavator that we cannot connect to using CAT ET. 330B_3YR. It only has this connector. What adapter and software can be used to connect to this machine?
ET cannot be used to diagnose that machine. Refer instead to RENR1998 (Excavator Engine & Pump Controller) for System Operation and Test & Adjust.
It's strange, before this I connected to the 345B HEX. It has the same ECM Machine Control under the seat in the cabin as the 330B.
AFAIK only the bigger machines connect using ET and even then some will not have the connector. It was a bit it & miss back in the 90s.