When I turn my key to on for the required three seconds for the machine to check levels the monitor makes a beep. I can run for a few hrs before the red lights dimly come on and it squeals. It will do that for 1/2 hr before it fully illuminates and is on. If the machine is sitting in the sun when I got to start key on three seconds the red lights will come on and 1/2 hr later will be on and fine. I have checked power to the monitor via the ecm and it has it. Does anyone know anything about this? Is this a common problem with these old machines> I get a green yellow light and the yellow means it is not communicating with the monitor then when it lights up just green light.
No replies yet.