Heavy Equipment Forums Heavy Equipment Community

4 in 1 loader bucket?

ghitch75 ยท 2009-07-29 09:26

would a 4 in 1 off a SK fit on my C?.....here it is....a little passed half way down on the page.... http://bobhinesequipment.com/equip3.htm

Replies4
  1. #1gggraham2009-07-29 22:07

    The 580SK bucket would not fit your machine without cutting the ears off the bucket and moving them. We had a customer with a 580D bought a 580K III bucket. He was too cheap to cut both sets of ears off so we only cut off one side. This offset the bucket, can't remember which side we cut off but when we were done the bucket was inline with the RH side but stuck out past the wheel on the LH side.

  2. #2ghitch752009-07-30 08:22

    thanks gggraham.....you saved me 2800 buc's!!!....i owe you a :drinkup :usa

  3. #3JS580SL2009-07-30 22:52

    graham, Got another good one for you. I know a company with a 210C with straight solid steel loader arms. They bought a new bucket for it that was wrong dimesions. Instead of getting the right bucket or moving the ears, what do they have the welder do? Cut the arms half way, 90 degree angle out bout 3-4inches to make the width of the ears on the bucket.

  4. #4amunderdog2009-07-30 23:22

    Have any pictures?