have a 2000 416c cat backhoe, the front bucket comes up about a foot, then stops. the tilt works perfect and so does the bACKHOE does any one know the problem. also I need rear jack for the out rigger, any help thanks
Try holding the lift function back and reach around and grab the boom control and pull it towards you. If this causes the front to lift then you have a resolver issue in the lift function control. I have the same problem , the parts are not expensive less than 50$ for everything. Do a search in this forum on " resolvers" you will see my old thread.
that did not wrk, it still tops, any other ideals, thanks