We have a mid 90s 544G wheel loader and the clutch brake is not working. I have the switch turned on and check all the fuses and checked the relay and everything seems to be working that fine. I have went through the service manual and cant find alot of info on where to start trying to narrow down any issues. Any idea on where next to check?
Did you check the switch operation at the left brake pedal ?
What Dave said^^^^ will most likely nail it. It is a simple circuit. No relays. A signal comes out of the TCU, goes to the clutch cutoff enable switch, then to the clutch cutoff switch at the pedal, then back to the TCU.
Yep i just got back to work on it and the switch is working perfect and adjusted correctly. Where on this trans is the clutch cutoff enable switch? Thanks!
The clutch cutoff enable switch is on the operators console.