ive done the stall tests and the torque converter acording to the stall test chart was bad. i replaced said tc and did a service on the machine. retested and came up with same results. now when you run the machine on flat groud or you are operating the hyd alls good and is at the top of the spec scale.i thought that if i let the problem develop i would find another answer.when you turn of the machine the engine quits now with no hessatation.when you compare it with other machines of the same you can really notice the differace going up the hill.this machine only has 1200 hrs and im stumbed.i also isolated the hyd and engine still stops abrutly.
What is combine stall speed? I used to work for a Case Dealer.