I currently have Fault 4207, and will not see Neutral. (590 Super N) - Switches checked - all good - Pressure - at idle (in Neutral), good except for Port 1, I have 189 psi when there should be 0psi - Shift rail does move freely, but move back to 1st gear position upon startup of engine. - Diag soft ware shows for 3v when disconnected, .95v (1) 2.05v(2) when connected - checked all solenoid's on the pack, appear to be working. - all switches appear to be functioning properly via the EST software. Your help would be greatly appreciated.
No replies yet.