Have a problem with the aux hydraulics. Can't get them to work. We know the right lever is the one that controls it and we have the pin or bolt out that locks the handle in place when not in use. But the handle still does not move. We had the cab raised and can see the linkage that goes to the valve. When we try to move the lever it seams the linkage moves but that is all. Any one have any thoughts on the problem.
i would suspect that the detent assembly on the back of the aux spool is rusted. :drinkup
valve assembly Hi crewchief888, will the valve assembly need to be removed to repair the detent assembly.
disconnect the linkage from the spool, at the rear of the valve remove the 2 screws that hold the detent cap, push from the front of the valve towards the rear and remove the whole assembly out of the rear of the machine. :drinkup