Hello, help me solve the problem with the 924H. The gearbox goes into neutral while driving. Display shows N, and the vehicle doesn't move. You should engage neutral gear and F or R again and you can continue driving. It happens randomly from time to time. The parking brake is off, the neutralizer is off, the wiring has been checked, and the brake sensor has been replaced (the wire was worn out). The problem occurs more often when driving over bumps or using the bucket. The entire gearbox has been inspected: the oil, filters, and pressure are OK.
Has anyone looked at the electronic control system to check for the presence of Active Diagnostic Codes.? This does not require a scan tool.
Sounds to me like that is a controller on the steering column problem being that’s intermittent going to be tuff to prove might possibly be able to see it with et
Hello, we checked through the dashboard, there are no errors. We noticed that if we move the wiring, a malfunction appears. We'll check it out. Does anyone have an electrical schematic? Can you share?
Certainly. Check your message inbox.
Nige thanks you really help me