i have a 953 with a code 079 0466.13 . i believe this mean left foot pedal out of calibration ? if this is right , can anyone tell me how to calibrate it and get rid of the codes . Thanks
Strange - a 953 dozer........ Does this strange animal have a Serial Number..? Just to get the right procedure.
it certainly does 2ZN5070
You have a reading assignment .......... all 3 files are attached. It's not hard to do but you should familiarize yourself with the documents regarding the procedure before actually trying to do it. The switches are in a panel under the RH armrest in case you were not aware. 1. CID466 FMI13. 2. Calibration Operation. 3. Calibration Submodes.
Thanks i will start on my assignment now .
Nige you are my new hero. the info you gave me made a that project simple . thank very much for the help . Marry Christmas to you and your family
Before you start merrily calibrating, just make sure that the issue is nothing simple like loose fasteners or the like that would cause the pedal position sensor to mis-read. If you have any doubts about what you’re looking at I suggest that you use the RH sensor installation as a guide.
You got NIGE'D. Tell your wife it was better than sex. ……..well, don't do that on second thought.