Heavy Equipment Forums Heavy Equipment Community

955l undercarriage

Scott Heath ยท 2020-11-03 23:48

Will the tracks from a Kamatasu d57s1 fit a 955l 85j model

Replies7
  1. #1fest7772020-11-10 23:02

    try calling a under carriage specialist , they should be able the match the pitch of the tracks on your machine

  2. #2DMiller2020-11-11 07:27

    Answer according to my charts is NO. Cat is 6.91 pitch D57S is 7.48

  3. #3Master Link2020-11-12 10:44

    The track groups off of a D53S would work as they have the 6.91 pitch. What is your complete serial number? 85J10060 and up uses a 8" pitch chain. These models have the same undercarriage as the D6C-D machines.

  4. #4DMiller2020-11-20 14:38

    May want to measure, not always 8.0 as change Segments can revert back to 6.91.

  5. #5Scott Heath2020-11-20 19:23

    Thanks for the info When loading this 955 it stops pulling tools back a few feet starts pulling again it did this several times before making it on the trailer it seems to pull fine no flat ground any ideas

  6. #6DMiller2020-11-21 06:50

    Check filters and levels first Sounds like weak pressures

  7. #7AllDodge2020-11-21 08:02

    Agree, filters and fluid levels