As in the transitions of Ontario's new SPIF regulations, I am trying to make my self more available to the public with questions, concerns, etc. Anyone wishing to know anything regarding the installation to information I will answer any questions with the best of my knowledge. Thanks Mike
What are SPIF regulations? Never heard of it. Oh yeah - Welcome to the Forums.
In Canada, Ontario effective january 2020 all lift axles must be steer axle and computer controlled (air pressure, when to raise when to lower etc,
Welcome to HEF SpifTech !
SPIF...aka as of January, all older tri-axles lost a crapload of value, or became 'heavy' tandems.
So when you say "computer controlled", what exactly are you doing? Engine CPU is controlling drop axles? or just some board tied into the trans so that if the truck is moving the axle has to be down? Can't you just retro fit a older truck with a steer axle instead of a fixed drop axle? Also- welcome to the board.
Its a stand alone computer based box such as one of these from this specific dealer. https://www.wheelmonitor.ca/products.html It's actually very complicated. the screenshot is a setup of a walking beam suspension Here is the link for the actual spif regulations. https://www.ontario.ca/laws/regulat...362.502860403.1583203482-623894549.1583203482
Yeah I hear allot of that. Some are selling out of province. Allot are booked into our shop for new steer axle and lift axle computer contols. Roughly about 20k Canadian