good morning, I have an 2005 ASV RC60 and looking for electrical drawing and or service manual. machine will not move, no hydraulics at all. all fuses and the 3 safety switches were checked and even jumped out., relays swapped. looking for a little direction before i start ripping stuff apart. and of course everything stopped while operator was scraping snow so front end is in air a little with all weight on bucket, nice. not looking forward to getting underneath and removing belly pan and checking wiring there or possible stuck pilot valves.
Verify you have hydraulic oil movement first. You may have lost the pump drive.
going to do that when i remove belly pen, and when its not raining, LOL. i'm hoping its the coupling.
The pilot solenoids are under your feet, there is usually a removeable plate on top, or you can remove belly pan. I would be hoping its the pilot valves, or related wiring rather than coupler. A whole lot easier to fix.
thanks, no plate on top, feet sit on fuel tank, all belly pan. just got info from ASVI and checking some things, like you suggested. see if i have pilot pressure, but doubt it.