Looking for a pinout for Bobcats 7 pin attachment plug. I need to adapt bobcat attachments to a 14pin machine.
Skid Steer Genius.? They do adapter harnesses of anything to anything, or so it seems. https://www.skidsteergenius.com/
The bobcat 7 pin plug will go to a control box on the attachment and then to the solenoids. What you need is a 14 pin harness that goes directly to the solenoids and bypasses the control box. Like this: https://www.skidsteergenius.com/collections/bypass-cable-kits/products/sg-bph-14-6-9-dp
Do all bobcat 7 pin attachments have the control box? Customer has a bunch of bobcat attachments and I dont know exactly what attachmemts just that they are 7 pin. Clearly it's not a simple one adapter on the new non bobcat machine to make all his attachments work.
SSG could probably answer that question over the phone.
No phone number on the website. My parts guy says they dont communicate very well
The bobcat 7 pin system is CAN-BUS. It's computer signals, not 12v on/off. So all 7 pin attachment will have a control box. The control box on the attachment converts the signals to 12v on/off for the solenoids. 14 pin machines are outputting 12v on/off. So if you get a harness and bypass the control box, you can just go directly to the solenoids. Unfortunately, you'll probably need a harness for each attachment. It would be a pain to keep switching 1 harness between attachments.
More info here: https://www.skidsteergenius.com/app...ts-into-my-catkubotanhjohn-deere-etc-machines