Heavy Equipment Forums Heavy Equipment Community

bobcat 773f aux hydraulics

gfd917 ยท 2014-09-21 18:37

Can anyone tell me what the flow on a bobcat 773F aux circuit is in gallons per minute? Thanks in advance

Replies7
  1. #1bigsmoke2014-09-21 18:42

    Standard flow is roughly 17 gpm, high flow should be 20 or better

  2. #2Killbox Alpha2014-09-21 19:01

    Maybe this will help. Bobcat posts all of these specs online. http://www.bobcat.com/historical_specs/

  3. #3gfd9172014-09-21 19:12

    is that enough to run a good brushcutter?

  4. #4Killbox Alpha2014-09-21 19:18

    Who is the manufacture of the brush cutter? If you can contact the OEM, they will tell you what it takes to run their attachments.

  5. #5gfd9172014-09-21 20:00

    Dont know that yet still shopping for one

  6. #6bigsmoke2014-09-22 19:41

    Should be plenty if your hydraulic system has been maintained. Most brush cutters will specify a range of flow rate at a specific pressure for the width of cut. High flow attachments are out there, but standard flow will be much more common.

  7. #7crewchief8882014-09-26 18:32

    new pump spec is approx 20gpm, used pump will probably flow approx 18-19 GPM bobcat's 60" brushcat would work. :drinkup