Hey All, I have a 2007 Bobcat A300 My problem is that sometimes when the machine is running the lift and tilt valve light on the left hand display will go out and the loader arms will cease to function, when I hit the press to operate loader button the light will not come back on unless I shut the machine off first and turn it on again On the right display I see an ACS icon and under Active warnings I See the message: ACS(AHC) SENSOR SUPPLY VOLTAGE OUT OF RANGE Under system troubleshooting it says: Alarm occurs when an ACS(AHC) error occurs. See the Electrical System Service Manual for probable causes and repair solutions, This problem only happens sometimes but I need the machine for important work and am wondering where to start. Thanks in advance. Bob
No replies yet.