Thanks for allowing me to join , I have a C 13 Cat with all cylinders showing high and low current and all intake valve actuators showing current high . Can anyone help ?
What is the engine installed in.? How are you reading the Diagnostic Codes, ET.? Post a list of the all Codes that are Active.
lol KCB59090 , Reading codes from Cat electronic technician Cylinder #1 thru #6 injector current high Cylinder # 1 thru #6 injector current low Intake Valve Actuator #1 thru #6 current high
sorry... its in a Vanhool charter bus
Because all 6 injectors and valve actuators are reading identical codes then it appears likely something common to all of three Codes for each of the six cylinders could be the root cause. I'll send you the electrical schematic. Keep an eye on your messages. Here are the 3 troubleshooting procedures for cylinder #1 all in one document. The ones for cylinders 2 thru 6 will be similar, just different wire numbers which you should be able to figure out from the electrical schematic.