case 1150h just over 2000 hrs. machine starts to loaad up when moving forward. feels like maybe brakes dragging. in reverse the machine feels good. the longer the machine goes forward the drag inreases.
Welcome to HEF @Lawrence Anderson Are you sure that the binding is happening on BOTH tracks or on one side only? I say this because there is a forward & reverse pack for each side of the machine. (LH & RH) Take a good look around the track gear & check for any excessive play/oil leaks at the idlers & sprocket area + rocks caught in the frame. Make sure the brake pedals are free & returning fully - that pedal adjustments/linkages have not come loose & caused the brake valve to be actuated. If that all checks out OK, you will need to install a pressure gauge to the transmission test port & check some pressures - particularly noticing if there is a difference between FWD & REV.
To add to what alrman said check final drive oil levels also.
checked left final have chunks falling out and silver oil. will pull final
will check right final also