Hey y'all, just finished work on hooking up a bobcat 709 backhoe attachment to a case 1845c with standard flow auxilary hydraulics. It's taken a while since I haven't had much time, but originally had to replumb the aux hyd since previous owner deleted. Just tried it out and it works well, but when unhooking the lines, the one connector felt hot. IR thermometer put the connector at ~140 and the pump at ~160. After searching the net I can't find the proper temp. Before I go busting anything I'd like to check the proper range. Anyone out there know? Definitely appreciate the help.
Hydraulic temps, as I was told, should never be 180°F.
If he removed the aux hydraulics possibly he removed the power beyond sleeve, does the unit seem to be loaded up when you start it?