Have a 580k when try to dump the bucket the lever won't go to the right unless i push forward a little. if bucket is off the grouns 3ft then it works. The assembly is back inthere hard to see. so before i disassemble thought I would ask has anyone had this problem and what the solution was.
Worn linkage , out of adjustment and / or lack of lubrication are all possible problems. Look at the linkage in the Case online parts book to get familiar with what you will be looking at.
Look at the anti-rollback linkage pivots on the RHS of the machine - they should move freely. Plus look at the front cab mount, in front of the steering wheel behind the glove compartment - If it has come loose the cab will drop a little & may cause lever binding issues.