Is there a source for the primary shuttle assembly for a Case 855D? The parts book says Not Sold Separately (#29 in the picture)... but that's really the only thing that we thing we need (it seems broken/loose compared to the other one at the joint near the end). Any leads are greatly appreciated. Thank you!
Is the broken/loose end visible in your photo? It doesn't look like it is meant to move in the spool body because of the threads on the end--so maybe it can be glued back together with a fine weld and a bit of grinding and/or machining. That's assuming it is broken in the area just near the bottom of the photo. (below your middle finger.) Otherwise, the hydraulic valve looks like it might be a pretty standard valve that may not be a Case unobtainium original. If you have a decent hydraulic shop in your area you might take it to them, with the parts drawing and get their take on it. You can also check the used iron guys in your area--but expect to be sold the whole valve. Jon.