How to adjust flow for aux. Tool on case cx130
Is the machine b or c series or just a straight cx130? I will assume its a straight cx130 The flow settings for the aux were rather crude at best. You will need a flow meter, or just kinda guess. The dash will lower the engine rpm as needed, to reduce flow to the aux circuit. See directions below: 1.Press Travel and Work mode switches simultaneously for 3 seconds. CHK 1 screen will display. 2.Press Auto Mode switch 3 times and RST 1 screen will display. 3.Press Alarm Stop switch to select BRK (item selected will have a light background) 4.Start engine and adjust engine speed to desired RPM with throttle potentiometer. Monitor will display actual engine RPM in BRK window. 5.Press and hold the work mode switch for 10 seconds to set the RPM. The buzzer will sound when 10 seconds has elapsed. 6.Do not throttle down. Turn key-switch to off position to complete procedure. 7.Start engine. Press Travel and Work mode switches simultaneously for 3 seconds. CHK 1 screen will display and engine RPM can be monitored. 8.Increase engine RPM to high idle and operate the auxiliary pedal. Engine RPM should lower to pre-set value. You can also install stroke limiters in the spool end cap.
Thanks man. I'll try that