Ive got a hydraulic oil leak from two fittings that I cant identify therefore have no clue how to fix. Pics attached. If anyone can tell me how to go about fixing the leak, the oil flows up out of these two ports anytime the machine is running. Thanks in advance.
IT IS THE TRANSMISION MODULATION VALVE WILL HAVE TO REMOVE PUMPS AND IT TO RESEAL. PS RELEASE PRESURE ON HYD TANK FIRST!
We had that set up on a whole bunch of Clark Transmissions that the seal would leak behind that style cap. The roll pins were tight to get out but were doable. Think you will have to pull out piece as Steve said. Simon C