not toataly familiar with a 930G at work when i turn the kill switch on after doing my checks get in cab put key in and turn it let it do its thing wait for glow plugs it wont crank nothing happens. just a red light that stays on, go google to see what it is tells me oil pressure so i check its lvls still good. anything els like other buttons i might of needed to push. only got maybe 20hrs experience on the thing. tried asking the guy whos off he says thats weird but hasnt given me any ideas to try. id go use my skid steer but its broken too that will be another thread.
Post your machine serial number.
Make sure its in neutral that would be the most common reason
one of the things i checked multiple times moving it into different positions didnt seem to change what it was doing
Again - Serial Number is required for detailed info. Is the Park Brake on..?
parking break was on. figured it out after draging the last person who had borrowed it from us over to figure it out. i didnt know u could drive it with the joystick and it has a finiky neutral switch or somthing like that.