Heavy Equipment Forums Heavy Equipment Community

cat D6N Implement Hydraulic System

pierre botha ยท 2025-08-04 08:34

hi i have a D6N ALH 00871 fittet with 4 way valve . ripper doesnt want to work . it only works when you use the blade .

Replies4
  1. #1Deimos2025-08-04 10:05

    If your ripper only works when the blade is engaged, then you do not have an LS signal from the ripper section. There may be a blockage in the LS channels. You need to check the resolvers in the B-B section, and check the flow control valve (22, 17, 16 in the picture).

  2. #2Deimos2025-08-04 10:08

    Ripper Section No. 13

  3. #3pierre botha2025-08-04 13:38

    hi will check them thank you

  4. #4pierre botha2025-08-04 13:45

    is this on valve 13 ripper or nr2 sway