i want to change the gear oil in my tracks on my kubota i have located the two allen key bolts, but i dont know if i have to open one first before the other and to what level do i fill upto the lowest or highest allen key bolt also there is not much difference on how far apart they are one is about a inch higher then the other.. thanks guys i have a vauge idea on how and what to do but i just wanted some advice from someone who is fimiliar with doing this type of oil cahnge.
i just read my post and i wasnt to clear on what i needed to know. to get the rest of the oil out do i have to raise the machine first and spin the tracks slightly to promote the rest of the oil out ? i completly left that bit out
Generally speaking you align the holes at the 12 and 6 o'clock position. Drain via the lower opening and fill via the top opening till level with the hole.
Depending on what year it is you should probably use synthetic gear oil. I know the newer models call for it. Do you have an operators manual for this machine?
no i dont have a manual, its a kubota k030 98 99 model if that helps.
Hi Rami1, if i looking for service/parts manuals for kubota k-030-3 mini excavator. Please help me. thank you