New hear . i am working on a D2 older cat dozier , don't no much about runs pretty good but will not turn my boss said he used to run in the bank and the clutches would let go then it would turn ? So i have not done that so would like some help if possible .
What he means is the clutch pack discs are stuck together so he pulled the steering clutch levers and put a load on the machine, the increased load was enough to break the stuck discs free. You must have the levers pulled back when you try it and be in 1st gear.
ty d pete can i fix this problem and is there somewhere to get parts and a repair manual one of the handles is free it has no resistance at all .it goes forward and backwards that's it.
Look for a missing linkage pin, lots of info on older machines here http://www.acmoc.org/bb/forum.php
thanks dpete ill have a look .