Hello. I have just had my hystat pump rebuilt in my d3g . Now the tranbsmission light flicks on very quickly and randomly. Maybe Once a minute . Its that quick i only see it out the corner of my eye . But it is definetly the trans light . Would a faulty forward reverse lever cause this ? Or a blocked hydraulic suction screen . Cheers
Hi Sam a serial number will help a great deal Did you have the unit rebuilt by cat ,outside source or your self? if the rebuild was due to mechanical failure was the system flushed correctly?
Hello. the unit was rebuilt by a hystat specific business using genuine rexroth pump parts . System was flushed . There are no metal bits in the filters . The serial is d3gbyr00546. thanks
Mark , are you able to tell me what the transmission light actually represents and where I can find the sensor(s) that control it ? Cheers
Possibly loose wire from all the commotion.
Have you cut the filters open and checked in the pleats? The indicator light is for electronic faults and could be from a number of sources have you checked for fault codes? I will list the procedure below