d5h 3md 442 sn. this tractor seams to be low on oil flow the tractor runs trans hot after about 2 hrs i have worked control valve (cat did it) went through steering clutch and breaks linkage presser is good no metal in filter. knowing that trans gets oil first and cooling with what is left, seams to be a volume problem. with a gear pump is this possible.
An engine stall test would tell you alot. I dont know what the parameters are for your machine and engine but there is someone here that can find out.
thank you vetech63 never had one heat with metal
well pulled tran cat went in plantares said bearing race had broke had a little metal on clutch seal put back in and seams to be good .