my blade angle function just stopped on my d5k this morning serial number yyy01385. I have moved the solenoids to another function and still have nothing. I also removed the valve from the body and flushed some fluid through there to clean it out, as it has been known to stick. I also checked the fuses related to the blade function with an ohmmeter, they checked out good. If I pick the front of the dozer up and tilt the blade while trying to angle the blade, it will go, but will not move otherwise. It was straightening itself after tracking about 100 yards. Is the machine out of calibration? I am still green to this business so any and all help is appreciated.
No replies yet.