Heavy Equipment Forums Heavy Equipment Community

D6T DOZER

Tommy Sanchez · 2022-07-30 18:40

Having problems with output speed sensors

Replies14
  1. #1CM19952022-07-30 20:13

    Welcome to the Forums TS! First of all the wrenches here are going to need a serial number or at least a prefix before they can even begin to give advice. Unfortunately I'm just a part-time moderator and a 1/2 assed contractor with not many mechanical skills to give any advice. However there are some very knowledgable mechanics here on HEF that are very gracious with their knowledge. Best of Luck!

  2. #2Tommy Sanchez2022-08-09 21:35

    Ondy00412 is the serial number need to know or if someone knows if the left final drive can create a code for out put sensors

  3. #31466IH2022-08-09 21:41

    What exactly are you having problems with?

  4. #4Tommy Sanchez2022-08-09 21:44

    Every time I press the brakes the code for out put sensors come on and the engine speeds up to 1500rpms

  5. #5Tommy Sanchez2022-08-09 21:45

    Could this be on the left final

  6. #6Staskzn2022-08-09 22:30

    У кого есть расшифровка кодов ошибок cat d6t

  7. #71466IH2022-08-09 22:59

    What is the code that comes up?

  8. #8Staskzn2022-08-10 08:23

    030, 036, 113

  9. #9Staskzn2022-08-10 08:24

    Пропала 1 передача вперёд и назад

  10. #10ugis2022-08-13 01:24

    these russian people… they come to a place where everyone uses English and don't even think of trying to adapt and use a translator to communicate with everyone. No, they make everyone else use the translator. It's like a disease.

  11. #11emmett5182022-08-13 10:00

    Russians don’t take a dump without a plan.

  12. #12emmett5182022-08-13 10:03

    Most Russians are pretty cool, especially the ones who reject communism.

  13. #13John C.2022-08-13 10:40

    Most of the nice "Russians" I have known turned out to be from Ukraine.

  14. #14CM19952022-08-13 18:05

    Welcome to the Forums Staskzan. The official language here on HEF is English and all posts must be in English. Thank you.