Greetings, Does anyone here have any information on a used D8 SU Blade? Looking to spend around 20,000.
If that’s 20k US dollors,you may struggle. More like 25/30k US dollars
Would have to add tens of thousands of dollars to that price to get a D8t here in Canada. That may get you a 15,000h machine…..
He's only looking for an SU Blade, not a complete machine......... To the OP: Do you need push arms, linkages, tilt cylinder(s), etc, or just the bare blade.? What S/N of machine is it going on.? I see a load of different D8T SU blade Part Numbers.
Oops! My bad Missed that rather important detail.
AW401382, Push arm and blade, after doing some more research 25/30k seems more in line.
Is your machine an LGP configuration.? If yes then what width of track shoes does it have installed.? LGP or not will make a big difference regarding what blade option(s) will fit.
28" track shoes
28" shoes are the widest available for a non-LGP D8T undercarriage configuration. (LGP shoes are 38" wide). There are obviously differences between the mountings of a blade over 38"-wide shoes compared to 28"-wide. That was the reason for my LGP question. See attached for all the details of the push arms, stabilizer link, etc, applicable to your A4W-prefix D8T running 28"-wide track shoes. Having Part Numbers at least means you can search for what you need. I also added all the four options of SU blades that will fit on to that particular Blade Installation Arrangement
Yeah thankfully it is not lgp, it seems it may be harder to find a blade and arrangement to fit if it was. Is there any chance you could share the same information for a U blade?. Thank you in advance adnd Thanks a lot for the previous help sir! Have a blessed day.
There are only two options for U-blade. See attached.