You will find this online under genie service manual
If your asking wire colors of of connection QD3 (QD4 is color to color) Scissor harness - Platform control box harness Pin1- Blue - White Pin2- Black - Blue Pin3- White - Red Pin4- Red - Black Pin5- Orange - Orange Pin6-blank
Hi Guys, I finally got a bit of free time and looked back into this. You are both amazing thank you so much i have done as you said and its now working! I now just have one issue. When i plug the charger in it flashes each LED on the charger unit twice individually. Then all of them flash twice together. Then when its meant to start charging it flashes the first 3 green LEDs together and beeps continuously and never stops. After you unplug the power it stops after about 10 seconds. But i cannot get this thing to charge. the voltage is measuring correct, the batteries are brand new and wired correctly. Any thoughts? Again thankyou so much i know you guys dont have to give up your time to help people like me but i really do appreciate it. Heaps of Karma your way! Thanks David
I was working on a genie the other day that customer pulled the wires out of the plug on control box side. Couldn’t get the genie site to down load so I had to go to hef and find this.