Does anyone have a list of "stuff" that Deere's J1939 protocol makes available for monitoring? The ScanGauge that I bought has 15 pre-programmed codes already set up, but I think there are others that would be interesting to add. Not sure where to look to find what is actually available on the diagnostic port under the electrical console. Thanks;
Deere has a list available to us tech's of what "we" can see with Service Advisor but not a list of what code scanners can and cannot see. If you need to check codes you don't need a scan tool anyway. You can access codes anytime through the monitor. If you need to clear them then you have to enter the monitor's service mode (press and hold the menu button for 5 seconds).
Is that possible on a JD 2006 310sg ?
Yes. Check your messages.