Heavy Equipment Forums Heavy Equipment Community

engine mounts

donJ ยท 2025-12-12 21:19

on case super E does the back engine rubber mount flange install between the frame and engine? on my backhoe the flange (the large portion of the rubber mount)is on top which don't make sense

Replies5
  1. #1Tinkerer2025-12-12 22:07
  2. #2donJ2025-12-13 22:27

    thanks Tinkerer...I was sure someone had installed these wrong...I was almost embarrassed to ask but is number 9 a spacer..is not there

  3. #3Tinkerer2025-12-14 12:45

    Yes it is a steel spacer. Notice that there an item 9a. I think there are two different ones so that the angle of engine can be set to line up with the drive line correctly.

  4. #4NH575E2025-12-14 16:31

    You can match these up at McMaster Carr also.

  5. #5donJ2025-12-14 18:40

    there is a washer(9A) ...thanks guys