Cual es el sensor de regimen de paso? Y donde esta ubicado?
Hi, to help people help you, what machine manufacturer, model and serial number do you have? Hola, para ayudar a la gente a ayudarte, ¿qué fabricante de máquina, modelo y número de serie tienes?
hi caterpillar d6k2 xl MXK00104
this is something more along @Nige 's knowledge
Good morning. You rang.........?? Attached is the procedure to troubleshoot the 872-9 Diagnostic Code for the Pitch Rate Sensor. This is usually related to a fault on the CAN Datalink. Sorry but there is no Spanish version of this document. Se adjunta el procedimiento para diagnosticar código 872-9 para el sensor de velocidad de cabeceo. Esto generalmente está relacionado con una falla en el Datalink CAN. Lo siento, pero no existe una versión en español de este documento.
You also need to be aware of this. Potential problems in a wiring harness directly related to the Pitch Rate Sensor. También debe ser consciente de esto. Posibles problemas en un arnés de cableado directamente relacionado con el sensor de velocidad de cabeceo.
excuse my ignorance, but what is the pitch rate sensor?
I think it is one of the sensors in the bottom of the blade control joystick that measures how far the control has been moved from the neutral position..
Excelente, voy a tratar de limpiar el control de la hoja, muchas gracias, bendiciones! Excellent, I will try to clean the blade control, thank you very much, blessings
The first part of the troubleshooting procedure is to open and clean every major wiring harness connector between the joystick and the Implement ECM. There are two position sensors located underneath the joystick. I am reasonably sure that the Pitch Rate Sensor is the one which detects the forwards and backwards movement of the joystick. (The one that detects side to side movement of the joystick is the Inclination Sensor)
Dios te bendiga por la información que me has dado God bless you for the information you have given me