Heavy Equipment Forums Heavy Equipment Community

Galion 104 series b questions

Pipevine ยท 2019-01-09 12:47

Can anyone tell me how to check the hydraulic oil and trans oil level on this machine?

Replies5
  1. #1RMXR2019-01-12 04:47

    Go here, scroll down and start reading: http://www.steeringclutch.com/transmissiondiscsGALION.htm

  2. #2Pipevine2019-01-12 20:46

    Thank you very much

  3. #3Pipevine2019-01-24 13:42

    Does anyone have a good source for manuals or information on Cummins jnr100? Also is there a different name this engine is more commonly referred to as? I'm also needing to Source information on a seal kit for the injection pump. Thanks in advance.

  4. #4Galion118c-ryan2019-02-02 09:59

    for my 118 assuming its similar i just remove the two little bolts on the filter housing on the top of the hydraulic tank and keep it over where the return is probs about 4 inch or so down from the top, for injection pump might be able to find out who made them and source from that point so instead of searching for cummins your searching for bosch for example and trans oil not 100% sure myself either

  5. #5Cody ross2025-02-27 17:54

    How do I fill the transmission with fluid for a galion 104 series b grader