THIS TELEHANDLER WHENACTIVATED ONE LIFT CYLINDER STAERTS STROKE ROUGHLY 3/4" BEFORE OTHER CYLINDER STARTS ITS STROKE CAUSING BOOM TO SHIFT TO SIDE. I'VE REPACKED BOTH LIFT CYLINDERS AS WELL AS REPLACED BOTH CBV's IN CYLINDERS. ANY HELP WOULD BE APPRECIATED. THANKS IN ADVANCE!
The CB valves may not be set to the same pressure. One breaks open before the other. Switch the valves and see if the problem switches too.
IT WAS A BAD "NEW" CBV I HAD CHANGED.
It happens. I always changed them in pairs, but sometimes theres still issues. Glad you got it fixed