Heavy Equipment Forums Heavy Equipment Community

Having Problems with a JCB 506B telehandler.

Clay Brewer ยท 2014-10-01 15:53

I, changed the tranny fluid and filter and now it is blowing the filter seal out of it. I, did remove the stainer and clean it also. Any ideas

Replies6
  1. #1GregD12014-10-01 18:04

    100 % positive you have the correct filter ?

  2. #2Moonlite2014-10-01 19:33

    Pull the filter back off and see if you left the original gasket on the filter base

  3. #3Clay Brewer2014-10-02 06:11

    Thanks recieved the filter from the local JCB dealer and no extra gasket.

  4. #4GregD12014-10-02 09:27

    Doesn`t matter where you got it from. Are the threads the same pitch on both filters ? If they are the same,time to pull out the pressure regulator valve and see if it is stuck.

  5. #5FSERVICE2014-10-02 22:36

    It can be wrong from the dealer!!!! Belive me

  6. #6GregD12014-10-02 22:49

    rrrrrrrrriiigggghhhhtttt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!