I would first like to apologize to those I have offended by placing pictures of my equipment in their post. New on the forum I didn't take time to read the rules. So i would like to present you my product.
Look's like a good idea, and it's not 40' ft. long, good luck with the business. sam.
thank you Sam, we have a lot of trailers and small hook lift trucks sold in Canada, we now want to expand our territory. We receive many requests from people in the united states but were not certified until last month.
That hooklift rearloader is pretty cool never seen that before.
Thank you, we build this kind of equipment for small municipalities, parks and campsites. every vehicle we built, truck or trailer, is equipped with an auxiliary hydraulic output to power accessories such as sand spreaders, asphalt heater, winch, trash compactor (we built these accessories too) https://www.youtube.com/watch?v=klOyzH0kdD0 https://www.youtube.com/watch?v=rUri35jLoRQ
And a hot patch body, that's even better.
a compilation of our hook lift products https://www.youtube.com/watch?v=6qDF1dBOdNs
This is the first hook lift trailer i built in 2007
If you ever expand your territory to the west coast of the United States let me know, That 3-axle 21,000 lb trailer is the best looking trailer out there.
A dealer pretty soon in Reno, Nevada Hi, Thanks for your comment we'll have a distributor in Reno, NV soon. We have the demo here ready to go We are working to find a shop on site for assembly the trailers. trailers will be shipped disassembled in enclosed trailer we have also to find a company to built the bins, platform and few accessories, around Reno. transportation costs for such equipment is prohibitive.
Our last Hot Box trailer
Well looks like there will be a road trip to Reno in my future
This one is going to Batavia, NY
We have a trailer that dose up to a 30 yard ( up to 25' long) roll off container. You don't see that stile you show with the hook on the top like that in VA. A 30 yard roll off container with a top makes a great 5,750 gallon portable water tank that is easy to move around once empty.
?????
I grabbed a random youtube. I could not find one that showed underside better that was not done by a company (advertisement). https://www.youtube.com/watch?v=W_e5ZusMmxU The one end of the platform, dumpster, or what ever has a set of 4” by 6” steel wheels this is normally the end that opens if there is a door. The other end has a large hook at the bottom. There is a set of steel box tubing that runs from end to end under the bottom. The trailer or truck has a set of steel tubes that use 1 or 2 hydraulic cylinders to tilt to around 70*. You take a heavy winch line to the hook on the container. As you pull in the winch you can change the angle of the lifting bed. The tubing on the containers go on the outside of the tilting bed. Are you able to set container on a dock or load a container that has sunken into the ground with that setup? I also see people using the type I was talking about to haul sheds around They have smaller wheels on it and I think an air lift on the suspension. I even have a frame that a 20' sea can sits on so I'm able to move it around. Great for job site office, work shop, and my portable electrical unit (genset with all our electrical control gear). Everything is bolted down and you have to do some clean up before hand or you'll have a huge mess. I'm sure I would not be road legal because of the height.
https://www.youtube.com/watch?v=jtj0ABfsGVQ https://www.youtube.com/watch?v=6qDF1dBOdNs cable systems are archaic, they require manual handling, planks floor so that the container can roll. all these actions are useless with a hook lift, it is not necessary to pull the container, vehicle, trailer or truck back under the container, the container does not move, very little. No damage to the land. the hook Lift can easily drop a container on a dock. For objects that should remain horizontal we developed the Skip Loader that fits easily on our Hook lift trailers or trucks I designed and built all you can see in the videos. https://www.youtube.com/watch?v=L5_UXeatanQ https://www.youtube.com/watch?v=tXm0GNczs3w
I had never seen a good video of a hook lift and never see them around in my travels. Your right on there being less angle. None of the dumpsters I have seen even have the place for that hook. I did not know the cable system was from the stone age, but I do see the advantages to the hook lifts.
Hook Lift is the next step and will gradually replace the cable systems. In Europe cables have been missing for more than thirty years now, and be replaced by hook lift, more safer and faster ... Low maintenance cost... Don't need to have your knees in the mud to fix a cable...
Are you guys using a Stellar Shuttle hoists on your trailers? That A frame looks just like the two Stellars we have.
Its called copy catting. The internet shows too much information.
you mean Stellar copied Stronga, in Europe Hook Lift systems are very common. We use our own systems developed over the years, if you take the time to look carefully you will see an evolution in the design of our systems. Ampliroll, palfinger, Hiab, who copied who?
I wasnt suggesting you copied them directly.... I thought maybe you purchased parts and pieces from Stellar and assembled your own. I suppose theres only so many ways you can build one of these anyway..... After i looked again i noticed some of your other models look more like a Swaploader, Ampliroll, etc. Is there some advantage or disadvantage to the A frame style arm?
My answer was for the other guy (Simplize) The A style is easier and cheaper to build but the main drawback is the length limitation of the containers, a difference of 2 feet unlike the JIB version that allows the loading of containers with greater length differences, up to 6 feet depending on the model
It's a go for New-York...
This one is going to Montreal today...
Reno, Nevada office We are planning to open an office in Reno, Nevada during the month of July 2015. We'll keep you posted Thanks for your support!
Here are our three new trailers of May with 15 containers and 2 platform
another one ready to work
I really like that first trailer in your first post. Wish I wouldn't have just bought a trailer. You have an enclosed container also?
Hi Barnbuilder Yes we have enclosed trailers from 12 to 18' lenght what trailer are you talking about, the black one or the 2 axles double wheel ? See your MP
Our demo for the USA is almost ready to go, it will be shipped from Quebec city September, 10 th. First stop in Springdale Arkansas. we will tow it through, Oklahoma, Kansas, Colorado, Wyoming, Utah and Nevada. Here is an overview of the lettering of the container.
Two full load today for Arkansas
a new accessory for our Trucks and trailers, 16 CU/YD Rear Loader Compactor Hook Lift type
Nice. When I was a partner in a garbage collection company we looked into getting one of these bodies for our hook lift and going after residential collection. It's the perfect add on for breaking into that side of the business. Drop the body and pull roll offs and then run a residential route.
Thank you for the comment CM1995, we are working hard to convince small municipalities that Hook Lift System is a smart choice to reduce the size of fleets.
Almost ready to go, picture time and road test to do
Final Tests
We are now working on a new design for one of our customer in Guyana (South America) a Skip Trailer 8 tons lifting capacity, bins from 5 to 12 cu/yd The design is done, we will start to built the first one next week, 9 are sold
Our last promotional video https://youtu.be/is_5UnxVW1c
It's a go to Knights Ferry, California. 3 220 miles from our shop. our products are unique and are starting to be known everywhere
Hi, Our new web site is online now www.hooklifttrailer.com
The best part is that you might actually get a shop to work on your truck if you can just drop the nasty, smelly trash container off the back before you take it in.
Next step for our new Skip Loader Trailers First test today www.hooklifttrailer.com
Last test before shipping to Georgetown British Guyana 9 trailers like this one will be shipped next week. The customer ask us to paint the trailers the same color as his tractors. Another Great project for us. The trailers are 8 tons capacity with hydraulic brake, 20K capacity agricultural axles www.hooklifttrailer.com
Here is our last Hook Lift trailer, 16K Bumper pull, Aluminum rim, tool box on each side, spare wheel and hydraulic jack. Two like this one will be shipped in Pennsylvania tomorrow.
Mini Lift test. The perfect tool for your pickup. 3 850 pounds capacity https://www.youtube.com/watch?v=S3ZhL57-Qww
I've never seen the pickup style lift used with out the pickup bed. Looks like a much better setup. Do you have any more pictures of the hook units bolted directly to the truck frame?
Copycat Slicklift has been using this design for several years.
Amerideck also, even if the principle seems similar, the design is completely different. We manufacture this kind of product for several years. the point we wanted to share here is the capacity of nearly 4000 pounds for our new model.
Here are our new trailers, the biggest is 30k capacity 22' deck, it will be shipped to Oregon next week with the green one.
We shipped this unit with 10x 6.3 cu/yd mini containers two weeks ago in Tennessee, custom product with tarping system.
Very nice looking truck but i bet it's overweight empty. I have a short wheel base 550 with a stellar hook that is hard to put a legal load on. Your setup looks lighter and that's a good thing, the stellar adds 1,300# plus the container.
Very nice. Clean product and install.
Thank you.
Here is a video we made today, test time for our new 30K Hook Lift trailer https://www.youtube.com/watch?v=Qt3mCiA-xjI
Those are some very nice looking trailers you build!
Our new Hook Lift Trailer, build for the US Air Force, The pink one at the end of the video will be shipped to New-York next week.
already 10 years as we build our Hook Lift Trailers
A Customer came this morning from Alberta (4 000km) to pick up his trailer and 4 20 cu/yd containers, Have a nice trip Jordan to go back home... another 4 000 km to do. Our trailers are unique in North America
A new CL242DGN16 ready to go
What's better than letting your customers talk about your products Nice video from Johnny Bobby in Louisiana
here is our smallest model of hook lift Trailer, 6K Capacity, for containers from 2.5 to 8 cu/yd and platform up to 11'
Here is our last concept of Agricultural Hook Lift trailer
we did it, our first Semi Hook Lift Trailer
Another incredible project we did a few months ago. Carry moving and standing up a statue of 7 tons and 34 feet in height.
Shipping Day, two trailers AG4422J for a customer in Montreal, Canada
Wow, I see you got your product well loaded there, Awesome... I imagine the security of your loads is one very important issue when you ship out to your customers...
from 1:00 you can see how the statue was installed in its base then on the trailer
Our New 30K Hook Lift Trailer for Bins from 12 to 18 foot
Our first Stone Slinger, Gooseneck 30K, 10 cu/yd, slinger speed more than 3600 ft/mn, real test will start tomorrow