pump. Hi.we had some issue with our cat 312 hydraulic pump mount and we had to replace some parts.but now we want to know the correct procedure of reassembling pump to fly wheel end.please help us. Thank you.
The bolts circled are actually pins. They are probably seized in the remains of the coupling. Unscrew them as best you can, free them from the aluminium chunks then screw them back into the flywheel. The new coupling is assembled to the pump shaft and slides over the pins when you mate the pump to the bellhousing.
You can usually buy the coupling as a complete group, new everything. Bob
Thak you sir for your reply. Serial no is 7DK00657 and i think it is very close to the 6GK... Modles as well.
Always, always, always check crankshaft endplay after reinstalling the pump assembly. Always.
This is the third time in less than a month that this question has come up regarding 312 excavator 7DK-prefix machines. Mechanically your machine Serial Number 7DK00657 is similar if not identical to a 6GK-prefix machine PROVIDED that you use a Serial Number that is BELOW 6GK00392 when ordering parts. NOTE: Much higher numbers of 7DK-prefix 312 excavator than your machine would be similar to a 6GK machine with Serial Number ABOVE 6GK00393.
Si Sir thank you for your reply. I need to know that what do you mean by crankshaft endplay and how do we check it. And i need to know after installing hub and coupler to the pump shaft can i insert the pump with installed hub and coupler together to the flywheel bolts.is that enough just inserting pump to the flywheel bolts. Thank you.
Thank you very much sir for your valuble info and it will be really helpful to us in the future. Thanx.
Will this part suitable for our 312 7dk modle. If not please tell me the correct part no for the coupling. Thank you.
Looks correct to me.
Thank you very much for all your replies.we got recovered the issue thanks to youall advices. Thank you.