any of you good at troubleshooting? have lc 210-7 hyundai with 3500 hrs on it....today, in high speed only....one track seems to be dragging....not in low speed, in low, you can spin cookies, track straight....put it in high speed mode, and it's "acting" like there's a brake dragging on one track? all other hydraulic functions are perfectly normal.
Check the lines going to the drive motors. Sounds like one of them may have gotten smashed or kinked and will not shift the lower speed side motor into high range. If that is not the case there is a spool in the drive motor that may be stuck and not allowing the motor to shift into high range.
Start simple. Sometimes dirt builds up under the pedals and mat. I know with my machine both pedals have to be ALL the way down to get it to kick into high. If one is just slightly up it stays in low. Other thing would be track tension/build up of crap in your tracks. Worth a check before you start ripping things apart =)
one word: C- Can A-Actually T-Track sorry...
:stirthepot opcorn
Made me What goes around comes around :cool2
Oh while we're on THAT bandwagon, wouldn't 3500 hours be considered warranty work? Or is it only CAT that covers their equipment after the sale? Nah but in all seriousness try the easy things before you start taking things apart.
track motor, your case drain will crack soon, happened lst week but on a lc-3 same stuff, drain the hyd. tank and clean it becasue there will be brass in it
if Im right, I believe most factory warranty's are only good for a year or so. I dont know how hours on the meter works into the equasion, tho
our 160-7 does the same thing, excet only when moving the blade. It didnt do it when it was new.
My Terex Atlas duck and the previous Atlas were 12months or 2000hrs and I expect most makes are similar. :drinkup