Hi, I have a 180e28 eurocargo, the radio didnt work. I seen that the fuse for the radio was blown so i replaced it, then i started getting CAN error. I had no indicators, wipers ect. Then i unplugged the batteries thinking that it would reset everything and now i have nothing at all. To start it up you have to press the hazard light to give the truck power, but because the hazard lights are not working that wont work now. Yes i have tried pulling that fuse out. Any ideas? Cheers, Nick
Might be a good idea to check your wiring harness going to your radio. A short circuit might of caused wires to melt together and give you all these problems. Or someone not too good with electrics might of been in amongst the harness playing around.
i rechecked all the fuses again and one was blown. I just find it amazing how they have one fuse running the truck
Yeah seems strange. Does it still come up with a CAN error when you put a new fuse in?
When strange thing start happening like things glowing and lights not working in the correct sequence or style it often is cured by checking the Cab earth points??
Was the blown fuse, the same fuse your replaced last time in the radio?
Nope all went back to normal, i left the radio not working. It screwed my day up bad enough already so let the new owner fix it
Just a thought as Radio's (I call em a Wireless) are often key dependant is it worth checking out the ignition as a possible fault???
Could have something to do with the ignition, there was no power to the rear of the stereo. Gone now anyway. Cheers, Nick