Heavy Equipment Forums Heavy Equipment Community

jcb 135

Moonlite ยท 2022-11-07 19:53

i have a jcb 135 skid steer that was running and died. its not getting power to the fuel solenoid, also noticed that when cranking the display shows 0 rpms. i have checked fuses and relays. any suggestions?

Replies2
  1. #1Vetech632022-11-07 20:20

    5 gallons of gas and a match

  2. #2thepumpguysc2022-11-08 03:01

    If your stuck in the bush/field, hot wire the solenoid straight from the battery.. & inorder to keep from smoking the starter, loosen the steel lines AT THE INJECTORS and crank until u get fuel & no bubbles then tighten.